Concrete formworking equipment includes pouring concrete platform, prop, bracket, supportive bolt, wedge and steel material, Formwork grip, clamps, bolt nut, middle bolts, punched angle and bolt plate.
These equipment have considerable resistance if produced in the “Foolad Faravar Zobi” complex, but if they are not observed in some cases, they may be damaged sooner than usual. For example, we can refer to “not good bonding of formwork equipment to each other”, “lack of unsuitable support under the foundations of reliability”,” not considering the live and dead loads entering the formwork” and “slipping of the adjacent soil layer”.
Formworking equipment produced in “Fezmigroup” are in longitudinal size of 1, 1.5, 2 meter, and 9 sizes 10, 15, 20, 25, 30, 35 40, 45, 50 cm is supplied that by putting the belt formwork together and connecting them by pin or clamps , it is easy to measure any dimensions with a coefficient of 5 cm.
Belt formwork is part of the formworking equipment that is used in the implementation of one-way and two-way walls, foundations and ceilings. The formworking equipment produced in this complex has accessories such as pins and wedges, tube anchor plate, J bolt, threaded tie bolts, tie rode, grip, plate, flat anchor, etc.
Wide Formworks for Pouring Concrete
Wide formworks have very large specifications and require measures to prevent thermal cracks, which for example can control the heat of wide formworks by placing cool water pipes inside them. It is possible to create an interval of 72 hours between the end of a pouring concrete stage until the start of the next stage on the previous layer.
Wide formworks have different types including concrete in buildings and structures, pouring concrete for pavements, water canal, tunnels and waterways. The formworks have attracted many customers due to being under strict quality control in the design and production phases.
Large-panel formworks manufactured by the complex must be tested by the customers as it is eye-catching and easy-to-use. The mentioned formworks are composed of one component, contains less seams, a few bolts and no middle bolts.
Special Formworks
Special Formworks are designed when it is not possible to perform the structure by the standard modular forms, corners and fillers. Special concrete formwork is one of the most widely used products in the market, which has a particular place among the other formworks. The formwork is of many types including star formork in various sizes. Grooved shuttering concrete formworks always attract the attention when it comes to construction. To utilize a special formwork, pipes, formwork soldiers and even aligning struts should be used. This is where our complex is able to provide you with the tools needed.